Instead of starting to Windows, an error message appears on a black screen. If the error message lists a particular hardware component, such as BIOS or fan, then test those components and service as necessary. It may also help to search the Internet using the exact computer error text.
The following are errors involving hard drive or primary boot devices:
1.boot device not found
2.Non-system disk error
3.OS Not Found
4.Disk Boot Failure
5.SMART Failure Imminent / Imminent Hard Disk Failure
6.PXE-E61: Media Test Failure
NOTE THAT:
By removing and resetting the hard drive may also solve some hard drive errors.
For any of these errors,You have do the following steps to solve it
1.Disconnect any USB devices that are attached to the computer.
2.Remove any CDs and DVDs from the disc drives.
3.Press and hold the Power button for 5 seconds to turn off the PC.
4.Turn on the computer and immediately press the F10 key repeatedly, about once every second, until the BIOS Setup Utility opens.
5.Press the F9 key, select Yes, and press Enter to restore the BIOS to the default settings.
6.Use the Right Arrow key to select the Diagnostics menu.
7.Use the Down Arrow key to select Primary Hard Disk Self Test, and then press Enter to start the test.
If the test fails, the hard drive may need to be replaced.
If all tests pass, restart the computer.You are done.
4.Disk Boot Failure
5.SMART Failure Imminent / Imminent Hard Disk Failure
6.PXE-E61: Media Test Failure
NOTE THAT:
By removing and resetting the hard drive may also solve some hard drive errors.
For any of these errors,You have do the following steps to solve it
1.Disconnect any USB devices that are attached to the computer.
2.Remove any CDs and DVDs from the disc drives.
3.Press and hold the Power button for 5 seconds to turn off the PC.
4.Turn on the computer and immediately press the F10 key repeatedly, about once every second, until the BIOS Setup Utility opens.
5.Press the F9 key, select Yes, and press Enter to restore the BIOS to the default settings.
6.Use the Right Arrow key to select the Diagnostics menu.
7.Use the Down Arrow key to select Primary Hard Disk Self Test, and then press Enter to start the test.
If the test fails, the hard drive may need to be replaced.
If all tests pass, restart the computer.You are done.
