1. First remove the battery immediately and do not try to switch off the handset. NOTE. The removing of the battery is a must
2. Now dismantle your cell phone carefully. To open your cell phone you need a torx T6 size screw driver and a tweezers. You have to remember the steps how you opened the phone as you will have to assemble it later
3. Dry the circuit board carefully and completely using a hair drier or you can also dry it in sunlight.
4. Dry the spare parts and components carefully and be careful with the LCD as it is very delicate.
5. Clean the circuit board with spirit using a brush this will prevents corrosion on the PCB.
Now reassemble your mobile phone carefully and if all goes well your mobile phone should switch on without any problem. If it fails to switch on you may charge your handset and try it again and if it does not switch on now you will have to get your phone repaired at a service center.
